Version 2.153 Toolpath Editor deletes program if empty. Toolpaths with Euorpean Errors are corrected. Version 2.152 Analayse remembers position. Version 2.151 Small move rounding arcs of less than 2 x Chaining Tolerance are removed. BackplotWithDecimalPlaces=0 added to [ToolPathType] in .INI If <> 0 then Backplot values are rounded to number of Decimal Places set. Version 2.150 Fixed initial directories Version 2.142 Decimal Point allowed in filenames. DXF Import Zero length Text not allowed. HomeMoveOff added to [ToolPathType] in .INI Version 2.141 Last tool is set when original toolpath is used. Version 2.140 Directory Paths Allowed. File New and Open check for changes. Toolpath Arrange Auto Scrolls when moving path. Toolpath Arrange loads Grid style editor for paths > 169 Save and Load Text has rotation angle stored. Change Directory Hidden in Backplot. Dimension text location uses Grid state. Copy/Move picture changed to correct style. Filename preserved when using CTRL + S. Toolpath arrange not allowed during backplot. Enter allowed in Mouse Xform and Nest. Blank Filename fixed in AutoLayout. Version 2.131 DXF allows for Block Names with Spaces. Sharp Corner intersections corrected. Version 2.130 Vista Compatible CTRL + R Redraws with highlight Version 2.125 CDLTrace.dll modified for decimal comma values. Translation of X and Y moved to text(13) and text(14) Import allows for Toolpath files. Offset changed to make arcs > tool rad into lines when using sharp in profile. Auto Layout filter changed for .pst, .cnk & .lnk Added By Point to xForm. Version 2.125 Added By Point to xForm CDLTrace.dll modified for decimal comma values. Translation of X and Y moved to text(13) and text(14) Import allows for Toolpath files. Offset changed to make arcs > tool rad into lines when using sharp in profile. Auto Layout filter changed for .pst, .cnk & .lnk Version 2.124 Black letters on Circle OK AutoLayout allows for maximum elements exceeding 16000. Path number added to Backplot. In [Options] use NoAddPath=1 to remove. Delete cancels selection. Version 2.123 Toggle line style applies to chain Version 2.122 Corrected missing fonts after directory change. Save/load Grid value on exit/entry Version 2.121 Printers bigger than A4 allowed. Version 2.120 19/01/2006 New HaspVB32.dll used Printer copies added Output DXF Header added to Settings form. Bad Kerf when Nesting is reset to zero. Version 2.118 14/10/05 Save DXF output full header. Command line file loaded according to extension. Version 2.116 Save as updates Title with the new filename Layer Names Preserved on DXF Load Version 2.115 Set Datum removes file chains Version 2.114 DXF Import, Circles increments count Version 2.112 DXF files with Numerical Layer Values loaded as Layer Numbewr Mod 10 DAO changed to 2.5/3.5 for XP memory problem Version 2.105 07/10/04 Pocket step multiplier changed for Zero lines. Added order by start element only in group to chain Swapped ignore intersections in group to chain. Use LeaveOriginal=1 under [ToolPathBurn] for copy to make new geometry. Version 2.104 Corrected [Options] ChangeDirectory spelling. Straight line tolerence tightend. Minimum Zoom changed from 0.001 to 0.0001 allowing for 500000 rads. Save Geometry corrected when last layer name is 'TEXT'. DatabasePath added to [BurnToolPath] in the .INI file. Version 2.101 Zero radius circle on Load Geo with CHAIN prevented if Entry Exit modifier is zero entry lines are not swapped when longer than circle rad. Version 2.100 19/03/04 Enabled Windows XP Theme Taper changed from Long to Variant Fonts settings saved. Added text for Hole Cutting. Write Chain added. Version 2.037 Break does not change layer or colour. Arc Line Arc corrected for duplicate centres. Import dialog remembers last filter used. "Feed Points" added to Settings form. The first point in a chain is machined when compensation is off. Added Hole cutting option using G81 Drilling Cycle. Post Porcessor: Modified for 'last feed' problem Version 2.035 Gap parameter (+/-) added. Feed from point onto chain implemented: AllowEndPoint=0 added to .INI file. FeedPoints added to .INI file FeedPoints=1 sets a chain of points = to lines. Shape Wizard loads layers 0 and 1 in their respective colours. Version 2.034 Lines Horizontal and Vertical where the first point is sketched have the focus in value. Version 2.033 Version 2.032 Redim for Toolpath allows extra dimension Move with multiple repetitions made an Error Picking chain of small lines allows Offset and Reverse Version 2.031 Just Dimensioning disabled in ISO, not the whole menu! Version 2.030 Dimensioning disabled in ISO ColourFudge option added to [ToolPathBurn] Version 2.019 Added CTRL + G create group All Added CTRL + C create group Lines/Arcs Point End Point ignores Mid Point Icon Chained geometry files import as chain not group Added WaitMouseUp under [Options] for Zoom function. Added Tool Number to Toolpath Zero tool with auto direction corrected. Version 2.018 Export DXF ouputs CIRCLE for full arcs. DXF Initial Layers selected. Delete duplicates 'Using Smart method' improved for arcs. Version 2.017 Delete Current Geometry calls DeleteAllChains to re-assign groups. DXF notifies number of Unsupported Splines & 3DSolids. DXF Imports Unsupported Polyline Vertexes as Lines in a Group. DXF Imports Unsupported Spline XYZ co-ordinates as Points in a Group. Version 2.016 Maximum chains checked Toolpath Editor gets Path Number in Comment X value in BASEPOINT for DXF corrected. Scale supported in DXF input. Complete Non ASCII DXF files imported. Version 2.015 Trap for Arc Arc intersection failure in toolpath added. Version 2.014 Fixed VB Dir$ bug Version 2.013 Analyse window cannot be below the screen visible area. Version 2.012 Repeat with new edge allowance is not called when comp is off. 2.007 View cannot be changed during Backplot. Bad dimensional position fixed. Invisible layers do not hide backplot. Tool Show/Hide selections reset for new file. 2.006 Chain recall order for NTFS fixed. 2.005 Directory function fixed in machining. 2.002 Filename in Graphics print placed outside of printed drawing. 2.001 Filename is Printed in Graphics if NoPrintHeaders=0 Page description is Printed in Edit if NoPrintHeaders=0 Modifiers diabled at startup 2.00 04/03/02 Security Changed. HideMenus=1 in INI file will remove any menu item with a blank caption. File Save and Toolpath Save both now use ".geo" Printer and Orientation box added to Print Menu. Compensation buttons do not affect lead in type. Backplot does not show rapid home inappropriately. 1.50 User Login implemented when AllowPathChanges=1 Entry/Exit Line lengths can be set. Added Entry/Exit angle modifiers. Toolpath remembers LastComp and LastEntry. Backplot does not show rapid home inappropriately.