Version 5.135
INIFile added to Registry HKLM\Software\CADLink\CADLinkUK.
Global ZCentre and ZStart reset after Backplot.
PrinterFitModifier=1 added to [Options] in the .INI file (scale multiplier).
PrinterOffsetX=0 and PrinterOffsetY=0 added to [Options] in the .INI file (twips).

Version 5.134
Roughing will work when the first move is from X0
Use ShellExecute instead of Shell to start V5-Post.exe
Pocket PC .Net 2.0 allowed for in registration.
Browse allows for blank filename.

Version 5.133
Recent file changes saved before filename change.
Toolpath program number stored separately for Mill, Burn, Turn & Wire
ProgNo added to .INI under [ToolPath(Mill-Burn-Turn-Wire)] and if present is always used if PictureDialog=0

Version 5.132
Fit changed to allow for Function Buttons
Recent files list is updated before the command line file load.
Arcs from DXF with incorrect angle near 360 fixed.
Arcs greater than 360 degrees in profile offset corrected.
Group selection number erased on Redraw when Branch is used in Group to Chain.
MaxRPM, StepRPM, MaxCSS and StepCSS added to [ToolPathTurn] .INI section for Spin Up/Down Speed buttons.
In Rough Plain, Z & X clearance used when automatic tool selection is off.

Version 5.131
Selecting a file from Recent Files sets the default directory.
If DrawDelay not present in the .INI file then DrawDelay is set.

Version 5.130
Added Drawing Sheet. Headings are under [Drawing] in the.ini file.
Windows 'Open' command does not cause a save changes message.

Version 5.125
Lines Rectange defaults to centre if the form close button is used.
Browse change directory gets all .geo and .cdl files.
Load Text compatibility fixed for previous geometry versions
Font modified to allow backslash, characters [\/@] added to TEXT.
Machining Fonts are retained if the form close button is used.
Machining Fonts added when C-Axis is enabled.
CADLink V5.INI checked for write privileges.
Options Folder text heading corrected.

Version 5.124
Modified Rough Undercut where additional cut is taken when not required.

Version 5.123
IGES Translator reads points from entity type 126.
IGES Translator informs on unsupported primitives.
Window chain fixed for z rotate.
Holding CTRL key while picking reverses geometry order. I.E. Last drawn is first picked.
DXF export of Circles/Arcs allows for full circles where the start angle in not zero.
Allow Aspect Ratio for Dimensions and Backplot.
Standard Grooving uses a chain of two elements (Point-Line or Line-Line) to set values.

Version 5.122
DXF linestyle defaults to SOLID in verb not found.
Toolpath Drawmode set for all paths.
Dimensions corrected for black background
Axes shown on gray background.
Rough Undercut Profile Following is applied to the entire machined surface.
C-Axis output of Arc Centres reversed.

Version 5.121
Mouse Zoom Icons have pointer enabled
Fixed File Save/Export directory error.

Version 5.120
DXF splines are processed if IgnoreDXFSplines=0 under [Options] in the .INI file.
Open Dialog works for Windows 7
Browse added to the File Menu, adds messages 1170 - 1173
If Picture Dialoge unavailable then the Program Number is requested.
Duplicate Points are always deleted using Exact method.
Invisble Points not found.
Macro enabled.

Version 5.117
Added "ShowVariables" to [Options] in the .INI file. Displays v1-v9 in Analyse & Distance if set.
Ask to Save added if file modified for Import.
Dimension Fontsize stored.
Modify/Arrange Toolpath gets Directory popup
Save BMP works for CDI.


Version 5.116
Web Update allows for V5
Added Messages 1161 - 1167 for file operations.
Toolpath Editor deletes program if empty.
Dimensions checked for validity after rotataiton in xForm.
Invalid Dimensions removed during file load.
File Open supports .DXF, .PST and .CNK
DXF BLOCK import corrected for non ASCII files.
cAxis handles last move being an Arc correctly.
After backplot in CADLink 2000 style the tool is displayed with AxisSide

Version 5.115
Analayse remembers position.

Version 5.114
Rough Undercut with negative clearance fixed.

Version 5.113
Version 5.112
Version 5.111
DXF Import modified to ignore OBJECTS
DXF Uses Colour from CADLink Layer if not set from file.
DXF Import of TEXT with %% allowed without style property
Toolpath form disabled when Picture Dialog is open

Version 5.110
Fixed initial directories
Fixed Start/Continue